MicroSquirt.com read only forum (Jan.15,2018)

Thanks for that David.
So the fuel will not cut until the kpa drops to 25 and your throttle is closed?
Does this mean that it will not turn the fuel back on until the kpa goes back up to 25 or the revs drop back to 1500 rpm if I use that as my low rpm

Keith

Can I use fuel cut with my ms1 with edis extra ? I have had a go at setting it but get no fuel cut.
I am not to sure what these settings refer to
Kpa lower than and TPS lower than( raw adc)

Thanks
Keith

Chris I tested mine at 4500 rpm and the timing was 28 deg and the AFR was 13to1
I am not using fuel cut so it could be that you are not holding the throttle steady and cutting the fuel on and off?
I was think of having a go at using the fuel cut now I have the map set up for my smaller injectors ...

Hi Chris mine is ok at 4500rpm so I will have a look at the mixture and the timing next time I have it running. I think you will need it rich what have you set it to?
I hope you have a good day at Castle Combe I am hoping to book another trackday with motorsport events soon.
Keith

Hi Mark and Chris I have just fitted injection with Megasquirt to my Tiger Cat( 2lt zetec).
I have use my old webers as throttle bodies and put the injectors into the weber manifold which works very well so far.I have to get hold of a set of smaller injectors as I am use ing 380cc from the Rover ...

can some one tell me if I can use autotune with alpha n?
I have used it with map but want to have a go with alpha as I am using throttle bodies.
If I can do I need to change any settings?

thanks