MicroSquirt.com read only forum (Jan.15,2018)

I've tried two different computers with two different usb-serial conectors. One of the two computers was the one I was able to connect with on the bench. The two computers are a regular laptop running XP and a Hercules EBX PC104 board running windows 2000. Could I be something in the little min ...

I am just judging my useing the port checker under the communications menu. When I test the com port that microsquirt is plugged into I get no response. Granted only on this port it takes a couple seconds before it says no response. On other ports it goes right to no response. All the gauges remain ...

we tried thge boot loader and was sucessful in eraseing the old code and re-writing the new code. We still can't connect

I am using the same computer/usb to serial converter as in the test bench so that rules out that part. Microsquirt does get warm when we give it 12V power so i know its getting power. I'll try the bootloader

how easy is it to fry microsquirt? I was able to get our computer to talk to the microsquirt on the bench. Now that we wired most of the sensors into it I tried to talk to it again and no such luck. We tested 12v at the amp seal plug and there is power going to the serial connector. We have a usb to ...

When I go to setup megatune for microsquirt I activate the 2.8ini file. When I go to connect to microsquirt it says the expected code is 2.87 and the reveiced code is 2.88. Is there some setting I'm missing?

Sory for the lack of info. Here is what we are using for an engine
its a 500cc 4 stroke twin the cylinders fire 180deg apart. It uses coil on plug ignition with a coil per cylinder and fuel injector per cylinder. We have a gm flex fuel sensor an are using it to create a flexfuel snowmobile for a ...

I'm having trouble figuring out how to control timing on our 2007 phazer cop engine. We were thinking of just using microsquirt for fuel control only. How would I set up microsquirt to do this? We already have all the sensors working except for the crank sensor. Would I still have to use a 36-1 ...