MicroSquirt.com read only forum (Jan.15,2018)

I want to use Dual Independent Ignition setup on my motorcycle. The motorcycle is a 180° parallel twin. I have two 180° opposed vr sensors with one long trigger tooth on the flywheel. I believe I need to trigger off the leading edge of the tooth since the long tooth gives a large error in the zero ...

Thanks Matt, I was looking for it near the end of the split loom and found it as you predicted near the amp-seal end.

Thanks for the link. It all makes sense now. Somebody f'ed up. The package I received had the controller the ms controller an ampseal connector with a bunch of wires attached and the DB9 to mini-stereo serial cable. My harness is missing the connector for the serial cable. I thought it seemed a ...

need help wiring my µs serial cable. I've searched the manual and I see which 3 wires are gnd, rx, and tx on the µs controller but I do not see what they are on the supplied DB9 > 1/8" serial cable. Am I missing something? I would think something as basic as this would be clearly explained.

Thanks for the great info. I"ll do some more digging to see if I can find out how the "cheap" sensor I found works. Sounds likely that I could get it to work.

https://www.dragtimes.com/parts/Flex-fuel-sensor-Siemens-13577379_200939409695.html Do any flex fuel sensor besides the GM one work? I was looking at the Siemens/Continental part# 13577379. I don't see any information out there. Also where does the flex fuel sensor typically go? In the pressurized ...

Thanks for the offer. I may take you up if I don't find anything more reasonable closer to home

I'm finally getting around to continuing this project. Anyone know of a place besides bigbluesaw.com and emachineshop.com where I can send them my cad drawing and have them cut out a trigger wheel? Looks like both of the previous sites want $110-$120 for a trigger wheel. I was thinking it would cost ...

There was some talk of µs on the teamzx2.com forums. Might check there.

Thanks for the quick reply. I'm familiar with Jaycar, I've bought some O2 sensor related gizmos from them. This gives me some ideas on what i could do to cobble something together.