MicroSquirt.com read only forum (Jan.15,2018)

Is there any one else in Brisbane with a micro squirt that you could substitute just to confirm that there isnt something weird with the MS?

Does hybrid alpha-n work on the microsquirt? Thats what I am going to use when I get around to turboing my project bike?

Good stuff, you need to have a look at Brent Prindles race sv650
on hte yahoo groups. Brent has had great success.

http://autos.groups.yahoo.com/group/meg ... essage/164

is the bike firing ? Also what cranking speed do you have in megatune?
I might be stating the obvious but if we have spark and fuel then the bike should fire, once we get to that point we can check for ignition timing etc.
You dont have a wb02 cause it will give you an idea of if its rich or lean at ...

Gary, the butterfys should be slightly open on idle to get the air into the motor.
Are you using speed density?

Hey Gary, well done
When is the start up?

Cheers

Dave

Yep, that will be good

With my MS1 I have used a NTC theremister and because the bike is air cooled and the sensor is on top of the cam cover and heats up pretty slowly I have set the warm up table to be 100% at around 48c and it works fine. Id imagine that the micrsquirt will be the same and I live where you are!!! :D ...

Have a look at Neils V max I think that he may have the ignition side of things going or his listing in the sucess stories under motorcycles
http://www.saarloos.net/

Hi Scott, the bike is getting better all the time, it would be great to get together. Palm log is a great help with the tuning side of things. Need to get into the ignition side of MS next