MicroSquirt.com read only forum (Jan.15,2018)

Ahhh, ok, now i get it.
So i have ask the question in the firmware board.

Thank You

Thank you,

but i thought, that my MS2 could manage a launch control (if i would mount a switch on my clutch pedal) with the spare out/inputs, but only the software is the problem.

So with new version of MT (perhaps with 2.5) the launch control i "enabled".

Am i so wrong?

PS: And i'm confident ...

Hey there....can nobody help me?

Hi,
i'm stimm running my Laptop and the car with the 2.1 code. But there are now some new codes available, and i`M wondering if they now will support launch control?
I've just installed the latest MT with 2.5, but could not find anything like this. And if it's not available, is there any need to ...

Sonett II ?

I startet with only injection, and this was absolutely no problem. But the ignition took me 1 week. So i would suggest to start with only one control.

Hi,
i only tried in the car with 5 real PWM Idle valves.
All of them behaved equal.
When cranking, they are open 100%
After this, they shut down to about 20%

Ok till here.

But when the enginge gets hotter, the valve opens more, and when CLT is at 80°C, the PWM valve ist over 60% open -> 2500rpm ...

I have the same problem, but no fix yet!
Now i will try the spare output on FIDLE, perhaps this works well.

Ok, then the LED transistor switches ground ( - ), and 12V + is always there (on the other pin of the diode)? Then i can hook up the diode to the positive side of the diode (right in front of the resistor)?


but I don't recommend having microprocessor outputs lines coming out of the MegaSquirt box ...

Thanks, thats great!

Is S12C ground ( - ) of the board? So i can connect the cathode to any ground of the board AND vehicle, outside the board?

The 2nd sheme of the Fidle circuit is a bit confusing....i don't really understand, why to use 2 transistors :oops: . But it will be no problem to copy ...

can nobody paint such a circuit, please?