Which pin DB9?

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
SCIROCCO53
MegaSquirt Newbie
Posts: 6
Joined: Fri Oct 21, 2005 9:43 pm
Location: Sweden
Contact:
Contact SCIROCCO53

Which pin DB9?

Post by SCIROCCO53 »

If I make a serialtunning cable which pin must I use?

MSnS-E V3
1.9 supercharged Scirocco MKI, MS-I/MSnS-E V3 Extra029q2 code

http://www.scirocco53.net
Top
Bernard Fife
Super Squirter
Posts: 1009
Joined: Mon Feb 16, 2004 3:15 pm

Post by Bernard Fife »

SCIROCCO53,

See step #26 here:

http://www.megasquirt.info/ms2/V3assemble.htm#serial

Lance.
Top
Post Reply

Return to “Tuning Fuel and Air”