Injector output question

For discussing injector selection, manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Qveon
MegaSquirt Newbie
Posts: 1
Joined: Wed Mar 29, 2006 1:24 pm

Injector output question

Post by Qveon »

Image

Looking at this picture, it has 2 outputs tied to one wire which goes to 2 injectors.

Can i hook it up so each individual channel goes to each individual injector to make it like sequential?
Top
Pete M
MegaSquirt Newbie
Posts: 1
Joined: Sun Feb 26, 2006 3:55 am
Location: UK

Post by Pete M »

Qveon

There are 2 wires for each injector channel simply to reduce the load on the pins of the DB 37 connector

So even if you connect each of the 4 wires to individual injectors you will still only have 2 channels

Pete
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”