Hi there, yesterday I tried to tune my VE table using a LC-1 WB lambda kit.
Everthing went ok but we had two very strange situations:
We drove normaly, not at full throttle, and suddenly our boddies were pushed to the front. This happend two times.
The datalog shows a total fuel cut off to zero. I have the screenshot attached. Why the hack does something like this happen?
I do not use any fuel limiter or something like that. This is a strange behaviour for an ECU O_o
Thank for your help,
Timo
Sudden fuel cut to zero?!
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Sudden fuel cut to zero?!
Running Suzuki GSXR 750 SRAD throttle bodies on Ford Zetec 16V
Using MegaTune2.25b627 and MS1 v2.2 with Spark'nExtra from last October, Knock system installed
Using MegaTune2.25b627 and MS1 v2.2 with Spark'nExtra from last October, Knock system installed