Im converting my 351 Cleveland to lpg injection (vapor) and have bought a compleet system from BIGAS. I have 8 solenoid like injectors with 4 ohms each. Do i need resistors for a MS2 versionboard 3. If so, what number of Ohm must i go for.
Thanks
Update, i found out they are 6 volts so i gonna need resistors. A naibur calculated these injector draw 1.5 amps so i need 4 ohm 25 Watt resistor to get back to 6 volts.
Cheers everyone
using 4 ohm injectors
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.