4AGZE turbo question

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Careless
MegaSquirt Newbie
Posts: 9
Joined: Tue Feb 28, 2006 2:25 am

Post by Careless »

'tis a shame you're located in illinois :(

anyways... are there any other documents or pages that you recommend i read that directly relate to this that you would find useful, rather than skipping through a bunch of pages that would just confuse me?



oh and i called my buddy with the car (im doing the electrical, so we're attacking different parts of the car, its easier for us to concentrate that way), and he said he's selling his entire 4AGZE wiring setup, the entire thing.

probably with the dizzy too.

but we have a 4AGE dizzy layin around. and we can rewire everything, as we were going for a clean setup anyways. is that possible to run the 4AGE dizzy instead, and how daunting would the wiring be?

im really anxious to get into the entire process of it (not to "get it working" asap, persay, because i know it will take time and patience). i just dont wanna start at a point where i forget everything that i've thought about after reading these posts. LOL. thats why i relay him all the info and asking so many questions.

but i applaud the patience you have to write it up whatever you feel like telling us.





oh, and internet connection sharing box will always be better than those damned routers you buy in stores. the process data faster, they sorta data faster, and they can be run in so many modes with so many features. for that same reason, people with a certain dLink router have been running linux on the router as firmware version, which allows them to add their own features and whatnot, because of the large memory size onboard in that particular model. further proving that haveing a PC that controls traffic is what everyone is striving for.


EDIT:

you COULD say that specific router is the modern day version of the MegaSquirt for Internet Connections.
:twisted:
i win the internets
Careless
MegaSquirt Newbie
Posts: 9
Joined: Tue Feb 28, 2006 2:25 am

Post by Careless »

:RTFM:
i win the internets
wickedslowAE86
MegaSquirt Newbie
Posts: 8
Joined: Wed May 25, 2005 4:20 pm

Post by wickedslowAE86 »

just to let you know, i've got almost the exact same setup. 4AGZE turboed AE86, the CPC on the firewall, MSnS-E. I'm running EDIS because my 4AGZE was DLI... which i will work on supporting properly at a later time. EDIS was the simplest thing, as i didn't have a distributor around, but now looking back i would have rather started with the distributor, and then worked on the DLI.
I have a base spark map donated by someone else... and i've done some tuning on the vacuum side... i haven't made it into boost yet, i can share with you what i've got if you like
Careless
MegaSquirt Newbie
Posts: 9
Joined: Tue Feb 28, 2006 2:25 am

Post by Careless »

hey thanks a bunch dude!

i have a friend that will be attempting 4AGE turbo via EDIS, purchased from the same guy that's building the 4AGZE (we're going supercharged now, sticking with the engines roots.... money is an issue at the moment, so we're making a compromise and forgoing turbo for this season, unless the switchover can be made in between events)

if you'd like to share info, feel free to post anything you want, like stuff i should be aware of before starting on these particular motors.
i win the internets
Post Reply