Gammae jumps to 55% from 92
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
HotStreetVw
- MegaSquirt Newbie
- Posts: 5
- Joined: Tue Nov 16, 2004 8:27 pm
- Location: Lubbock
Gammae jumps to 55% from 92
Looking at the datalog, when it happens, it shows that decel occurs after the jump in gammae. Decel doesnt show up after every event, but pretty close.
My Decel setting is 60%, which 92x.62=55% !! It always jumps to 55%.
The datalog looks like a V and the decel normally shows up the event after the rising edge. TPS always shows constant.
Will
Success Story
http://www.msefi.com/viewtopic.php?p=80843