Bike throttle bodies
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Bike throttle bodies
Anyone know of good source for used motorcycle throttle bodies in the USA oreferrably in the MidWest? Looking for something to replace 34mm Mikuni's and need ones like GSX's where each TB is separate. 38mm would probably work.
-
whittlebeast
- Helpful Squirter
- Posts: 147
- Joined: Tue May 04, 2004 7:20 pm
- Location: St Louis
- Contact:
ebay Search for gsxr throttle bodies They often go for about $100 and most on there are almost perfect. Wait for good ones. Make shure the injectors, wire harnice, TPS, Finger idle adjust cable(about 12" long with a knob on the end and fuel lines are all there. The traction control butterflys can be removed or jambed in the full open position fairly easy. They champ on to 2" ID hose making install fairly easy. See http://www.extraefi.co.uk/Gallery.htm for the ones we found for Phil
AW
AW
Sea-Doo 785 running MAF, V3 & Extra
www.v8efi.com Nearly self tuning Holley carburator replacement kit. Coming soon.
www.v8efi.com Nearly self tuning Holley carburator replacement kit. Coming soon.
Thanks, I had looked on ebay but my original search in motorcycle parts turned up nothing. Changed the search and found a couple. The Rover/Buick installation is pretty impressive. Did they fabricate a manifold or use a Weber one? Made me think about using a pair on my Pantera but I think they would be a bit small. They should be about perfect for my H1 Kawasaki.