EFI without TPS possible ?

Nickel_5000tq · Post by **Nickel_5000tq** » Tue May 16, 2006 2:29 pm

It s not possible to add a TPS on a 100Q 1989 Audi 2.3l 5 cyl. throttle body.

I would like to test a MS without the TPS.

MS-1 V3 2.25 MT.
29f1

Turbo4V · Post by **Turbo4V** » Wed May 17, 2006 8:41 am

The TPS is definitely not mandatory, you may be able to use MAP enrichment completely to do acceleration enrichment (that's what I do), thus eliminating the need for the sensor. The only other thing you loose is the ability to flood clear. I believe you need to ground the TPS sensor input if you're not using it, otherwise the TPS value will increase over time.

Justin

Nickel_5000tq · Post by **Nickel_5000tq** » Wed May 17, 2006 9:53 am

Ok.
I ll look at it.

Its what i was thinking too. i ll try and see.
thanks