I going crazy,my idle is going up and down then die.
See my Datalogs and my msq fils
MS-I/MSnS-E V3 029q2 code and PWM valve
Engine die???
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
scirocco_per
- MegaSquirt Newbie
- Posts: 14
- Joined: Fri Oct 14, 2005 11:25 pm
- Location: Sweden
- Contact:
Engine die???
VW Scirocco 1900cc with Eaton supercharger 11psi in boost and E85 fuel (ethanol) 399cc injector
MSnS-E V3.0 code Extra 029q2 Edis4
http://www.scirocco53.net
MSnS-E V3.0 code Extra 029q2 Edis4
http://www.scirocco53.net
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
scirocco_per,
You need to do some more tuning. It is quite normal to see this sort of behavior at first.
Looking at the log, the idle speed is highest when the pulse width is lowest. The pulse width varies from 3.7 at the highest idle rpm, to 4.0 at the lowest. I think you need to flatten the VE table near the idle bins (there's actually a bit of a delay, so the best value is probably in the middle somewhere, with a VE of 58 or so). You need to get that more constant.
Some of the oscillation is caused by the idle DC cycling from 68% to 0% and back, I don't know how that is supposed to work in MSnS-E.
Lance.
You need to do some more tuning. It is quite normal to see this sort of behavior at first.
Looking at the log, the idle speed is highest when the pulse width is lowest. The pulse width varies from 3.7 at the highest idle rpm, to 4.0 at the lowest. I think you need to flatten the VE table near the idle bins (there's actually a bit of a delay, so the best value is probably in the middle somewhere, with a VE of 58 or so). You need to get that more constant.
Some of the oscillation is caused by the idle DC cycling from 68% to 0% and back, I don't know how that is supposed to work in MSnS-E.
Lance.