This is a response to the several threads concerning the subaru and edis. I just got my first Mega 2 working on a 1.8 subaru flat four. I have machined the stock pulley down and fabricated a new 36-1 ring to weld on (same diameter). I'm using a stock Subaru crank pickup in the stock location and so far it is providing a reliable rpm signal up to 6500 rpm (thats as fast as I want to spin it). I'm planning on making several more of them so if anyone is interested please let me know. The more we need the cheaper they will be.
Joel
KAR14
subaru edis wheel works
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
not8player
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri May 05, 2006 2:09 pm
- Location: NYC
- Contact: