It is RUNNING!!! Only too rich-help!
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
twotyerfryer
- MegaSquirt Newbie
- Posts: 5
- Joined: Thu Sep 29, 2005 3:41 pm
It is RUNNING!!! Only too rich-help!
I've finally got the car running, only now it's too rich. I've set up the Req_Fuel for my engine and injectors (6.8 upper and 6.8 lower with 2 injections per cycle and alternating). I've set Afterstart Enrichment to 40% and 200 ignition cycles. Pulse @ -40F is 6.0 and pulse @ 160F is 3.0. I replaced the spark plugs hoping they were fouled from last time I raced but to no avail. The Warmup Enrichment @-140F is 180% and tapers down to 160F is 100% as found on the left side of the Warmup Wizard window. I posted my problems on another board that deals specifically with the Ford 2.3 turbo engine and found no real solution. Any help is appreciated. -Steve
MSII V.3 MSD 6AL
Set your idle mixture for peak vacuum and thoroughly read the tuning manual until your eyes bleed
Successfully MS2 v3.0 squirted 1971 Holden Monaro HQ
400 Pontiac, ported #16 heads, Tomahawk intake with custom plenum using LS1 78mm throttle body dialed in with a TechEdge 2E0 Wideband Controller.