I have read the sticky and links. I think I have set everything up right.
when I turn autotune on I get ..the tuning point out of window message.
I have tried adjusting the tuning block perameters but still get no autotuning.
some help would be great..
Im using MT2.25, MSnSE 029q2, msI 2.2v
autotune help
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
camrsz,
Did you read this: http://www.megamanual.com/megatune.htm#autotune?
Do you also have your EGO setting set up so that the EGO correction is operating? Without EGO correction, autotune does nothing.
Lance.
Did you read this: http://www.megamanual.com/megatune.htm#autotune?
Do you also have your EGO setting set up so that the EGO correction is operating? Without EGO correction, autotune does nothing.
Lance.