Someone look at my msq and tell me where im going wrong

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
bens_cab
Helpful Squirter
Posts: 89
Joined: Wed Mar 08, 2006 2:34 pm
Location: uk south

Someone look at my msq and tell me where im going wrong

Post by bens_cab »

have a look all comments welcome

strugling to get the start ticking over and running right

msns-extra 029q
Top
bens_cab
Helpful Squirter
Posts: 89
Joined: Wed Mar 08, 2006 2:34 pm
Location: uk south

datalog

Post by bens_cab »

looks like my fuel pressure and pw drop off to zero datalog attached

what would cause that
Top
Post Reply

Return to “Tuning Fuel and Air”