megasquirt map needed for zetec

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
16vzetec.com
MegaSquirt Newbie
Posts: 3
Joined: Wed May 31, 2006 8:07 am
Location: essex

megasquirt map needed for zetec

Post by 16vzetec.com »

i have a 2.0l zetec with escort inlet manfold.
i am looking for a map to load onto my megasquirt as my so called standard 2.0l map that it came with is miles out and wont even run.
mops
Experienced Squirter
Posts: 217
Joined: Sun Sep 25, 2005 4:13 pm
Location: Auckland, NZ
Contact:

Post by mops »

have you tried adjusting fuel_req ?
BMW, 1985, E30, 325i, 2-door, 5spd , 127k miles, short shift, MSII, V3/code 2.684/60-2 wheel/MT 2.25, LC-1 wbO2, ignitor module mod driving msd coil/, 3 pin Bosch PWC IAC mod
16vzetec.com
MegaSquirt Newbie
Posts: 3
Joined: Wed May 31, 2006 8:07 am
Location: essex

Post by 16vzetec.com »

mops wrote:have you tried adjusting fuel_req ?
i have no idea what that is mate.
dont know anything about megasquirt appart from its only easy if you know about it.
i dont know a thing about it and its all gobbldegoosche to me
Bernard Fife
Super Squirter
Posts: 1009
Joined: Mon Feb 16, 2004 3:15 pm

megasquirt map needed for zetec

Post by Bernard Fife »

16vzetec com,

Then you better start reading. See the FAQ (http://www.megamanual.com/) and manual (http://www.megamanual.com/v22manual/mtabcon.htm). If you aren’t willing to help yourself, many people here will give up on you pretty quickly.

Lance.




Posted by email.
mops
Experienced Squirter
Posts: 217
Joined: Sun Sep 25, 2005 4:13 pm
Location: Auckland, NZ
Contact:

Post by mops »

ok. in that case the map you probably have is a correct one. there are many parameters that affects how your car is running. i see no other way but either somebody configure it for you OR you have to read megasquirt tuning manual, learn it, understand it and then you will be able to work it out on your own.
BMW, 1985, E30, 325i, 2-door, 5spd , 127k miles, short shift, MSII, V3/code 2.684/60-2 wheel/MT 2.25, LC-1 wbO2, ignitor module mod driving msd coil/, 3 pin Bosch PWC IAC mod
MarkW
MegaSquirt Newbie
Posts: 24
Joined: Tue Mar 28, 2006 10:31 am
Location: Dorset, UK

Post by MarkW »

16V there's a few maps already on the board that you could download a try. I'll try and find the disc with mine on. I've got one for a 2L on Throttle bodies but it ran my car with the standard inlet manifold. Should help hopefully.

BTW are you the guy on eBay selling the egr blanks?
16vzetec.com
MegaSquirt Newbie
Posts: 3
Joined: Wed May 31, 2006 8:07 am
Location: essex

Post by 16vzetec.com »

MarkW wrote:16V there's a few maps already on the board that you could download a try. I'll try and find the disc with mine on. I've got one for a 2L on Throttle bodies but it ran my car with the standard inlet manifold. Should help hopefully.

BTW are you the guy on eBay selling the egr blanks?
yeah i was although i sold out at the moment.
you can get them from fords but you will have to go there and order them and then pay about the same so its just the hasstle.
i'll try the maps.
cheers
mike
MarkW
MegaSquirt Newbie
Posts: 24
Joined: Tue Mar 28, 2006 10:31 am
Location: Dorset, UK

Post by MarkW »

I've already hadsome off you mate :)

Found my maps but can't seem to upload them on here at the mo i you pm me a email add I send them across to you.
Post Reply