megasquirt map needed for zetec
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
16vzetec.com
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed May 31, 2006 8:07 am
- Location: essex
megasquirt map needed for zetec
i am looking for a map to load onto my megasquirt as my so called standard 2.0l map that it came with is miles out and wont even run.
-
16vzetec.com
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed May 31, 2006 8:07 am
- Location: essex
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
megasquirt map needed for zetec
Then you better start reading. See the FAQ (http://www.megamanual.com/) and manual (http://www.megamanual.com/v22manual/mtabcon.htm). If you aren’t willing to help yourself, many people here will give up on you pretty quickly.
Lance.
Posted by email.
-
mops
- Experienced Squirter
- Posts: 217
- Joined: Sun Sep 25, 2005 4:13 pm
- Location: Auckland, NZ
- Contact:
-
16vzetec.com
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed May 31, 2006 8:07 am
- Location: essex
yeah i was although i sold out at the moment.MarkW wrote:16V there's a few maps already on the board that you could download a try. I'll try and find the disc with mine on. I've got one for a 2L on Throttle bodies but it ran my car with the standard inlet manifold. Should help hopefully.
BTW are you the guy on eBay selling the egr blanks?
you can get them from fords but you will have to go there and order them and then pay about the same so its just the hasstle.
i'll try the maps.
cheers
mike