ok ive been trying to work out how to adjust my laptop for usb use with mt
at the moment i have comms with the ecu but it will do odd things like screw an msq up during burning it will cause the laptop screen to flicker and give me resets even with only the ignition on it also doesnt read the ecu as it should i can burn a good msq with my desktop pc and check all the setting which are good
if i connect my laptop and look at the settings they are all screwed up sometimes
any advice the usb cable is a plug and play usb to rs232 doesnt say much else on it and its a bluey green colour clearish
usb issues
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.