uS and a 4bar map sensor

Forum for discussing how to install MicroSquirt(TM), choose and troubleshoot sensors, wiring, and communications for MicroSquirt (TM) and MicroSquirt Module(TM).
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
turbo355
MegaSquirt Newbie
Posts: 19
Joined: Tue Feb 21, 2006 10:32 pm

uS and a 4bar map sensor

Post by turbo355 »

Will the uS work with the 4bar map sensor form DIY?

Will it also do constant barometric correction?
Top
Bruce Bowling
Site Admin
Posts: 285
Joined: Mon Feb 16, 2004 4:25 pm
Location: Baltimore, MD

Post by Bruce Bowling »

The uS code is the exact same as the MSII base code. The base code supports 4-bar MAP sensor, and it also has a constant barometric update mode.

- Bruce
Top
turbo355
MegaSquirt Newbie
Posts: 19
Joined: Tue Feb 21, 2006 10:32 pm

Post by turbo355 »

Bruce Bowling wrote:The uS code is the exact same as the MSII base code. The base code supports 4-bar MAP sensor, and it also has a constant barometric update mode.

- Bruce
Thanks Bruce thats what i needed to know.
Top
Post Reply

Return to “Installation, Wiring and Sensors”