Anyone know if microsquirt would work with a 36-2 style trigger wheel on a 3cyl for stroke motor? The engine in question is used in Bombardier Snowmobile and more than likely in their Sea doo lines as well .
Thanks
36-2 ?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
24c
- Master Squirter
- Posts: 593
- Joined: Sat Feb 16, 2008 12:15 pm
- Location: Chorley, Lancashire UK
- Contact:
Re: 36-2 ?
As the wheel has whole missing teeth, 36-2 shouldn't be a problem, but do you have any more info on the firing order for your engine. Are ignition events at 120 degrees or 180 degrees, say 1&3, then 2. I seem to remember a three cylinder Diahatsu working in the past.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: 36-2 ?
You would also need a cam sensor if this is a 4 stroke engine. For a 2 stroke, you can use just this wheel.
Matt Cramer at DIY Autotune
Re: 36-2 ?
Its a 4 stroke motor and does have a cam sensor . It is already an efi just not tunable .
Thanks
Thanks