Tony
shielding of ingnition and injection wiring
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
shielding of ingnition and injection wiring
Was wondering, when shielding the ignition coil wiring is it required to shield the "contol/ground" wire and the frame ground wire as well (3 wires per COP ) or only the 12 volt positive lead, same question on the injectors, both control/ground and 12 volt positive or just the positive lead.
Tony
Tony