I have an error coming up on my Tuner Studio when I select the sensor calibration tab in Tools, the error says:
Error Showing Dialog
for input string ""\000""
Any help would be appreciated
Tuner Studio Error
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Tuner Studio Error
Can you post a copy of the TunerStudioAppDebug.txt file?
Matt Cramer at DIY Autotune
Re: Tuner Studio Error
Sorry file to big it says
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Tuner Studio Error
Hi
See if this works
Alan
See if this works
Alan
-
LT401Vette
- Helpful Squirter
- Posts: 75
- Joined: Sat Jul 16, 2005 7:07 am
- Location: Charlotte, NC
- Contact:
Re: Tuner Studio Error
What firmware are you using?
Can you create a project Archive and post it or send it to support <at> efianalytics.com
To create a Project Archiv, from the main menu select:
File --> Project --> Create Project Archive
That will create a .tsproj file.
Can you create a project Archive and post it or send it to support <at> efianalytics.com
To create a Project Archiv, from the main menu select:
File --> Project --> Create Project Archive
That will create a .tsproj file.