Hi just collecting bits and pieces. I see you can buy 3 bar maps and temp sensors etc from aliexpress. They are cheap..Are they worth it? Or is it a case of you get what you pay for. Also I note that you can get non traditional map sensors, that look like a oil pressure sender. Maybe screw straight into the manifold etc. Are these ok to use?
Thanks in advance.
Chinese sensors worth it?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Chinese sensors worth it?
I've seen this happen with cheap MAP sensors.
Matt Cramer at DIY Autotune
Re: Chinese sensors worth it?
Yes, but did it still work? 
Re: Chinese sensors worth it?
Try an keep the boost down a tad hey 