gm 454 tbi

[cj599]

need help getting a rpm signal to my microsquirt v2.2 all thepages ive searched do not hel i have a 8 pin module what wire do i hook up and what settings do i need to change this shouldnt be this hard to figure out please help craighpfeiffer@gmail.com or 405 226 1696 please text

[Matt Cramer]

V2.2? Is this a MicroSquirt Module, or a cased MicroSquirt?

[cj599]

has a aluminium body maybe a 2.0 been a while since i opened it up

[cj599]

i believe the harness from diyautotune is different than the old harness can anyone tell me how to configure this box and wire it to the hei about to give up

[Matt Cramer]

If you are not sure of what you have, please post a picture of it.

[cj599]

i have got the rpm to the microsquirt it is a v2.0 older box i have a start up pulse but after it hits about 500 rpm the injectors shut down is their a video showing how to data log with tuner studio?

[Matt Cramer]

To get a data log, go to the Data Logging menu and click Start Logging. You will be prompted for a file name. The log starts when you save the file (this is an easy one to get tripped up on as a lot of people expect saving the file to be what you do at the end of the log). Once you have recorded what you need, go to the Data Logging Menu and click Stop.