Straight six cylinder
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Justfloorit
- MegaSquirt Newbie
- Posts: 9
- Joined: Thu Aug 24, 2017 12:51 am
Straight six cylinder
Hi all , can anyone tell me how to wire injectors on a straight six its a 260Z Datsun, not sure if i should use both inj wire for 3 cylinder s and the other wire for the othe 3 or one wire for all injectors.. Help would be appreciated.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Straight six cylinder
The injector drivers can handle a maximum of 5 amps each, so you don't want to try running 6 injectors on one output. Most straight six installs run the front three injectors on bank 1 and the second three on bank 2; I've also seen them paired "odds and evens".
Matt Cramer at DIY Autotune
