How do I burn maps to my ecu?

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
v8nut
MegaSquirt Newbie
Posts: 9
Joined: Tue Nov 29, 2005 9:31 am

Post by v8nut »

No, I dont have another board plugged in like that!
Not sure how to post the msq files yet - i will look into it.
Thanks Nathan
V8'S RULE
Top
efahl
Site Admin
Posts: 232
Joined: Mon Feb 16, 2004 3:15 pm
Location: San Clemente, California, USA
Contact:
Contact efahl

Post by efahl »

enzo wrote:are you sure that he's running a MSII and not a MSI?
It doesn't matter, as I rewrote the MS-II Downloader to become the All New MS-I/MS-II Downloader a while back... :)
Top
v8nut
MegaSquirt Newbie
Posts: 9
Joined: Tue Nov 29, 2005 9:31 am

Thanks guys!

Post by v8nut »

Thanks Guys think ive finally sorted it, it does indeed seem that I have megaquirt 1. Used easytherm to load megasquirt 1 v.3000 s.19 file and was met with success. obviously not working becasue I was trying to load the wrong firmware.
Thank you very much for all your help, just got to wire it in now.
Nathan
V8'S RULE
Top
enzo
MegaSquirt Newbie
Posts: 5
Joined: Mon May 10, 2004 3:53 am
Location: Switzerland
Contact:
Contact enzo

Post by enzo »

efahl wrote:
enzo wrote:are you sure that he's running a MSII and not a MSI?
It doesn't matter, as I rewrote the MS-II Downloader to become the All New MS-I/MS-II Downloader a while back... :)
sorry :oops: missed that part
Top
Post Reply

Return to “Tuning Fuel and Air”