I noticed recently, after I finally implemented my new spark map (as opposed to running 10 degrees of timing all the time), that a lot of things were not right anymore. Like acceleration erichments. I have no idea why this would change, but it did. Now, The car has started having major warmup problems, like it never did before. For no good reason, and varying temperatures, the car's AFR's will jump wildly (AEM wideband), and the car bucks and threatens to die. If this happens near idle, the car dies instantly. Please help! I'm so frustrated, been trying to iron out things for a month now!
-Mateo
very odd problems, car suddenly throws wild AFR's.
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
very odd problems, car suddenly throws wild AFR's.
'03.5 Mazdaspeed Protege, built and boosted!
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
Mateo,
I couldn't download your datalog - it may be too large. You have to specify what code you are using, otherwise the MSQ file isn't a lot of use to us.
Do the problem go away if you revert to your 'old' settings? If not, try reburning the code.
It might be that you are getting misfires (which would cause the AFR to fluctuate). It might also be that you have too much advance, which can casue rough running.
Lance.
I couldn't download your datalog - it may be too large. You have to specify what code you are using, otherwise the MSQ file isn't a lot of use to us.
Do the problem go away if you revert to your 'old' settings? If not, try reburning the code.
It might be that you are getting misfires (which would cause the AFR to fluctuate). It might also be that you have too much advance, which can casue rough running.
Lance.