Page 2 of 13
Posted: Mon Mar 20, 2006 12:51 am
by MoveX
If Microsquirt is released with a second spark output will there be wasted spark code available ?
Posted: Mon Mar 20, 2006 5:33 am
by jsmcortina
As Al has described it so far, the Microsquirt with use 2x VR sensors and 2x ignition outputs. So a typical 4cyl bike with dual VR pickups on the crank would work in standard wasted spark mode both even-fire and odd-fire as the two ignition channels operate nearly independantly.
James
Posted: Mon May 01, 2006 2:00 am
by boostinhard
Hi,
just wondering about any updates on the progress of the microsquirt? I have money waiting to order!!
Sam
Posted: Mon May 01, 2006 4:42 am
by MoveX
AFAIK at the moment is beta testing phase.
Posted: Fri May 12, 2006 4:50 am
by Bruce Bowling
Latest Microsquirt prototype board is in my hands, I will begin testing this weekend:
Mods are the second VB921 (not populated in the picture, they go on a heatsink at the bottom) and the second VR input.
- Bruce
Posted: Fri May 12, 2006 5:44 am
by MegaScott
OOOH Red!!
Nice!!
That would be a cool board to make an adaptor for, pins on one board, sockets on the other, fastened directly to the top of the adaptor board inside the stock EEC case.........
Posted: Fri May 12, 2006 9:27 am
by 78Spit1500Fed
Ain't it purty?
SMT technology never ceases to amaze me... I've done a bit of big "through hole" components on a ceramic board (no holes, just surface mounted) but this is a whole new level of cool. Pun intended.
-Brian
Posted: Fri May 12, 2006 9:29 am
by boost junkie
The ultimate anti-theft device. Put the ecu in your pocket!
MicroSquirt ETA
Posted: Sat May 13, 2006 3:34 pm
by sidy
Its looking very nice, I have 6 motorcycles I could fit it to!
Sid
On 5/12/06,
Bruce Bowling <
bbowling@earthlink.net (
bbowling@earthlink.net)> wrote:
Latest Microsquirt prototype board is in my hands, I will begin testing this weekend:
Mods are the second VB921 (not populated in the picture, they go on a heatsink at the bottom) and the second VR input.
- Bruce
This post is at:
http://www.msefi.com/viewtopic.php?p=119378#119378
Posted by email.
beta?
Posted: Tue May 16, 2006 1:58 am
by SeanS
I've been searching but didn't find anything on it ... but how does someone become a beta tester ? I'd really like to get in on this. I've decided to abandon my msns-e setup and make the switch now.
I have 2 bikes available