Page 2 of 2
Posted: Thu May 11, 2006 11:58 am
by elturbonitroso
oopps sorry but i mean that i cant run my car at 10 deg all the time thats why i going to use the ms for both since ican run a 20 deg all the time with the msd controling the time.
Posted: Thu May 11, 2006 10:37 pm
by pane
G'day
So where have i gone wrong then?
I used the instructions on the tfi page and i cant seam to get it to work.
Cheers
Posted: Sat May 13, 2006 12:38 pm
by elturbonitroso
the car still doing the same think but not a lot the car is now jumping from 12 to 14 in the wideband any advices.
Posted: Sun May 14, 2006 2:21 am
by pane
G'day
Today i pulled out the tfi dizzy and put a normal vacume advance dizzy back in.
Hooray, i finally have a stable idle and the car is now much more drivable. However i still have the afr all over the place
Now i think that the controller is the problem. I've changed all the settings to what there supposed to be so its either the sensor itself or the controller.
Cheers
Posted: Tue May 16, 2006 5:59 pm
by elturbonitroso
ok thisi is what happen know in my car when i rich up the mix the car idle very nice but the air fuel are in the 12 and thats to rich for idle any advice guys.
Posted: Thu May 18, 2006 8:11 am
by casper002
hey elturbonitroso , i have almost the same problem as you have,
i havemt yet knocked my idle timming down yet but at the moment at idle my .xls file from the log recorder is up and down and up and down, it looks like a hacksaw blade's teeth.
and if i up the mixture it idles great but in the 12'S.
i have tried all sorts now and just on the chance of it i am going to replace the inlet manifold gasket on the chance it has a leak on it.
I will keep you posted m8.
davey