ml to cc converstion?

[Uncle Bob]

Uncle Bob,
That is not entirely true, RPM does have some impact.

Think of this, say your injector open time is 1ms.
Well, on a 5000 RPM engine, you have 12ms between burns, so that 1 ms lost to opening, isn't so significant only 8.5% lost to open time. You still have 11 ms.

Now a 13000 RPM bike motor only has 4.6 ms between burns, take 1ms off for open time and you are down to 3.6 ms, so 22% of the injectors time to spray is lost in open time.

I understand your point, but even in your example, that still leaves near 80%....plenty of time for a properly sized injector.