Page 2 of 2
Posted: Thu Aug 31, 2006 10:01 pm
by BottleFed70
According to the ignition table you posted, you car is not idling at 6*.
Why only 10* timing at the 1200 and 1600 rpm bins below 100kpa? I'd expect your car to run like a dog at lower rpm and throttle.
Posted: Fri Sep 01, 2006 4:05 am
by Fastest95PGT
I was focussing moreso on the boost/upper rpm area for the pinging issue.
the car idles perfect
Posted: Fri Sep 01, 2006 7:15 am
by bens_cab
it idles perfects its only when i put load on at low prms it starts pinging also it holds back slightly that could be mix of both fuel ve and spark ve i just want to try and sort the spark map first before i go to much further
the 6deg idle was on another map it idles ok with 6deg and 10deg the map i posted is the one im using ill get a datalog tommorow and try and show where im getting the pinging
Posted: Fri Sep 01, 2006 9:04 am
by boost junkie
http://megasquirt.texasneons.org
My map is at the top. 2.0L turbocharged neon. Should get you close...