ecu setting like ve table air/fuel ect ect

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
BEV051
MegaSquirt Newbie
Posts: 3
Joined: Thu Feb 09, 2006 10:17 pm
Location: australia

ecu setting like ve table air/fuel ect ect

Post by BEV051 »

Hi I thought it would be good to start a thread where people could put there ecu setting like ve table air/fuel ect (i could not find any where this type if info is compiled) for people trying to tune there car so they could get a good starting point and make it easier for them both in tuning and finding this info. If you have some GOOD!! setting could u but them here to help others.

Thanks
Bevo

PS. Make sure you put what car it is from (just making shore. lol)
fscott
Helpful Squirter
Posts: 72
Joined: Wed May 25, 2005 6:35 pm
Location: Bastrop, TX
Contact:

Post by fscott »

Have you checked out the Success Stories section of the forum? You may find the same or similar vehicle there. Then you can contact that person and get their MSQ
xr3iturbo
MegaSquirt Newbie
Posts: 29
Joined: Tue Nov 29, 2005 1:24 pm
Location: WEST LOTHIAN SCOTLAND

Post by xr3iturbo »

yip as above or do a search found at top right hand corner of the screen
insert the car and it will come up with all related searches to that car then pm the person for help,they are all good guys on here always willing to help :D

tommy
rs2000
Helpful Squirter
Posts: 61
Joined: Mon Mar 07, 2005 8:32 pm
Location: Perth, Australia

Post by rs2000 »

i found it faster to start from scratch rather than try to adapt someone elses msq.. I got one off the same car, same engine built to similar spec and it ran like a dog.
Post Reply