Page 1 of 1
Injector output question
Posted: Wed Mar 29, 2006 1:28 pm
by Qveon
Looking at this picture, it has 2 outputs tied to one wire which goes to 2 injectors.
Can i hook it up so each individual channel goes to each individual injector to make it like sequential?
Posted: Wed Mar 29, 2006 1:40 pm
by Pete M
Qveon
There are 2 wires for each injector channel simply to reduce the load on the pins of the DB 37 connector
So even if you connect each of the 4 wires to individual injectors you will still only have 2 channels
Pete