Subaru Turbo Engine log file.
Posted: Sun Jun 11, 2006 3:19 pm
Hey,
So - I'm in the process of tuning with this engine - its a subaru EJ20 turbo (like a WRX engine although it's actually JDM spec). I'm running 2.34 MSII software with a V2.2 board and EDIS. PWM idle control. At the current time there is no intercooler, so intake temps can get a little high.
Basically - it seems to sit pretty close to stoke on cruise, but I'm having difficulty with low rpm around town stop sign type running; and I also think my accel enrichments are not in a good place.
Regardless - if anyone has time - I wondered if someone more experienced than myself could share any observations or ideas with me to bump the process along a bit...
Thanks in advance,
Fiid.
So - I'm in the process of tuning with this engine - its a subaru EJ20 turbo (like a WRX engine although it's actually JDM spec). I'm running 2.34 MSII software with a V2.2 board and EDIS. PWM idle control. At the current time there is no intercooler, so intake temps can get a little high.
Basically - it seems to sit pretty close to stoke on cruise, but I'm having difficulty with low rpm around town stop sign type running; and I also think my accel enrichments are not in a good place.
Regardless - if anyone has time - I wondered if someone more experienced than myself could share any observations or ideas with me to bump the process along a bit...
Thanks in advance,
Fiid.
You intake temps are a bit high. 