Page 1 of 1
What to do with holley four-barrel universal throttle body ?
Posted: Wed Jun 28, 2006 3:22 am
by jpassi
I have Holley's universal 1000cfm throttle body with tps and iac
http://www.holley.com/9900-171.asp . I was wondering what to do with iac, because I have Megasquirt V2.2 and if I understand correctly, I can't use iac with it and I should use a fast idle solenoid. Can I just leave iac alone and use fis or should I remove iac completely and plug its hole somehow? My car will be turbocharged.
All answers and ideas are welcome. Thanks for advance!
Posted: Wed Jun 28, 2006 8:16 pm
by ronsonol
Well, IAC does work with MS v2.2 mainboard, but requries you to have the MSII chip. You didn't mention which chip your running on your v2.2 mainboard. If you are using the MSI chip, you could upgrade the chip only and get control of your IAC.
See here for more details,
http://www.megamanual.com/ms2/IAC.htm
Posted: Thu Jun 29, 2006 10:15 am
by jpassi
I have MS1. Where can iget a new chip (the daughterboard) assembled or even a kit? I tried to look all those who advertice here, but didn't seem to find one.
Posted: Thu Jun 29, 2006 10:37 am
by ronsonol
Check here, you want the MSII daughtercard. It replaces the MSI chip.
http://www.diyautotune.com/catalog/mega ... -p-86.html - worth $90 IMO just for the IAC control, let alone all the other features and improvments.
Good luck.