MicroSquirt.com read only forum (Jan.15,2018)

Im hooking up an EDIS 8, and here is my plan:

I want to put all of it on a single bosch 30A relay. The coils are both hooked to a single 12AWG wire for the positive. The +12V and ground for the module will be 14 AWG.

What size fuses would you recomend for the single coil wire (2 coils on it) and the module?

Thanks.

You can probably get by with a 10A fuse and maybe even 5A. If it blows try a 15.