I've gone from 9:1 to 20:1... Bad injector?
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
I've gone from 9:1 to 20:1... Bad injector?
http://forums.hybridz.org/showthread.php?t=112744
Basically, my fourth injector shorted out on the ground side, turning it on for 30 seconds to 5 minutes each time the wire got near the ground. This was causing my afr to go down to 9.0:1 or so (LC-1). I fixed the ground as soon as I saw it, and the 9:1 crap stopped.
Three days later, my afr is up at 20:1. I can't accelerate. Basically I'm having the same acceleration issues I was having before, except now it's reading 20 instead of 9.
I'm wondering, uhh, what do I do? The resistance on all of them reads 2.7-2.8 ohms, and i'm wondering what my course of action should be... Is there a chance that it's still a bad injector though the resistance is reading right? my fuel rpessure is reading about 20 psi when the car is running.
-
BottleFed70
- Helpful Squirter
- Posts: 91
- Joined: Fri Jun 24, 2005 2:22 pm