code version issue

Forum for discussing how to install MicroSquirt(TM), choose and troubleshoot sensors, wiring, and communications for MicroSquirt (TM) and MicroSquirt Module(TM).
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
phazer
MegaSquirt Newbie
Posts: 8
Joined: Tue Jan 08, 2008 11:20 am

code version issue

Post by phazer »

When I go to setup megatune for microsquirt I activate the 2.8ini file. When I go to connect to microsquirt it says the expected code is 2.87 and the reveiced code is 2.88. Is there some setting I'm missing?
Top
grippo
MegaSquirt Guru
Posts: 921
Joined: Mon Feb 16, 2004 6:55 pm

Post by grippo »

The correct ini should be at:

http://www.megamanual.com/ms2/megasquirt-II.ini.2.8
Top
Tobisen
MegaSquirt Newbie
Posts: 27
Joined: Mon Mar 03, 2008 5:50 am
Location: Denmark(Europe)

Post by Tobisen »

I am lost here?
How should I config it correct?
Top
Post Reply

Return to “Installation, Wiring and Sensors”