Page 1 of 1
Microsquirt Startup error
Posted: Tue Mar 04, 2008 8:06 pm
by gun_hawk
I was having problems with my TPS so I reloaded the microquirt code 2.8 and now I am seeing this error "Warning :Megasquirt II.ini:0297 - Conditional check references undefine value 'n20' Only first reference will be reported.
Help Please
Posted: Wed Mar 05, 2008 6:42 am
by Matt Cramer
You need to copy the Settings.INI file as well. See here:
http://www.megamanual.com/ms2/code.htm
Posted: Wed Mar 05, 2008 6:50 am
by gun_hawk
I re-flashed the ecu with code 2.88 and the TPS started to operate correctly . Then I reloaded my msq file and the controller lost connection with the laptop. I tried reflashing the ecu and it was successful but I still can't connect to microsquirt with megatune.
So I can connect to the controller with bootloader but cannot with megatune.
Help pleaase..
Posted: Wed Mar 05, 2008 3:46 pm
by gun_hawk
I tried using port checker to find microsquirt and it did not find the microsquirt. However I notice that I am able to flash the microsquirt with or without the jumper connected . (strange)
I tried flashing it with and without the bootloader jumpered and it reported that 4 files skipped and 1429 records written.
It seems it is in a continous bootloader mode . This might be the reason why I can't connect to the controller.
Help again please