Page 1 of 1
Microsquirt and megaview
Posted: Tue Feb 15, 2011 6:12 pm
by Richard0327
Simple question. Will megaview and microsquirt work together and if so how??? I have hooked them up and nothing. Thanks
Re: Microsquirt and megaview
Posted: Wed Feb 16, 2011 5:38 am
by Matt Cramer
They should. What code is the MicroSquirt running? Any chance the MegaView has a processor set up for MS1?
Re: Microsquirt and megaview
Posted: Wed Feb 16, 2011 3:37 pm
by Richard0327
Yaaaa that would make sence. To start, the bod rate would be wrong. I will see if I can find update for mega view. Thanks
Re: Microsquirt and megaview
Posted: Wed Feb 16, 2011 8:29 pm
by Richard0327
OK I have had the megaview since 05 and it works great with an old megasquirt I still have. One with an 8x8 map. No ignition, auto tune and a nbo2. Microsquirt is running the newest V. No mater what I do it will not turn on the MV. Nothing. I have power and confirmed Rx Tx and G and that the MiS is running. What ya think Thanks
Re: Microsquirt and megaview
Posted: Fri Feb 18, 2011 5:23 am
by Matt Cramer
If the processor works with MS1, it won't work with MS2. You will have to change the embedded code on the processor (or change out the processor for one with the right code for the MS2's serial commands).