MicroSquirt.com read only forum (Jan.15,2018)

Hello,

We currently running this MicroSquirt:

http://www.diyautotune.com/catalog/micr ... p-519.html

With the latest MSextra2 firmware.

We hooked up an oscilliscope to the VR line and we are reading the right values but tuner studio isnt picking up the RPM (we tried adding a 1k/100k ohm resistor but that did not help)

I will update this thread with an image of the signal and TS settings; we have 18 teeth with one missing(in TS we set up everything we believe is right).

Has anyone had any alternate means of fixing this? Any input would be appreciated

With the latest MSextra2 firmware.

Hi
You are asking in the wrong forum...try this one

Mike
PS You need to add msq or datalog when you do!