VR sensor issue
Posted: Tue Jan 03, 2017 2:00 am
i`m trying to install an ms module on gsxr1100.
VR sensor produces around 200mv, but microsquirt see rotation only when i short r25.
i`ve tryed to replace it with 4,7kOhm, 2.2 kOhm and even 500Ohm, but still see nothing on the tooth logger
what can it be?
VR sensor produces around 200mv, but microsquirt see rotation only when i short r25.
i`ve tryed to replace it with 4,7kOhm, 2.2 kOhm and even 500Ohm, but still see nothing on the tooth logger
what can it be?