I think it would be very useful to be able to assign each egoLED a color other than red and green based on the AFR/O2 voltage.
That way when tuning the VE table, just by catching the color of the active egoLED in the perpherial vision the tuner could know it the AFR is correct.
Right now you only have 2 AFR groups/colors - the "Rich" red group and the green "lean group". Finer resolution will help tak full advantage of WBO2 devices.
Being able to assign the colors in real time rather than only by editing the INI file would make this feature even more useful.
What do you think?
Avner.
Feature sugestion/request: customizable egoLEDs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.