lambda and gauge

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
screamer69
MegaSquirt Newbie
Posts: 25
Joined: Mon Jul 25, 2005 2:20 pm
Location: peterborough----uk------

lambda and gauge

Post by screamer69 »

can i i run my gauge and m/s off the same sensor as at the moment im not useing ego correction so im thinking about putting it back on but my a/f gauge is on the sensor will i be able to run both of the same sensor ??
v3 board running extra 29k
megatune 225
2.0 8v vauxhall turbo 205bhp-232ftlbs@13psi (part mapped due to f***ed fuel pump) shes going to 28psi soon

My Success story http://www.msefi.com/viewtopic.php?p=12 ... def#129576
Top
fscott
Helpful Squirter
Posts: 72
Joined: Wed May 25, 2005 6:35 pm
Location: Bastrop, TX
Contact:
Contact fscott

Post by fscott »

Yes, the AFR gauge and MS can share the same sensor.
Tiny turbos kick butt!
Top
screamer69
MegaSquirt Newbie
Posts: 25
Joined: Mon Jul 25, 2005 2:20 pm
Location: peterborough----uk------

Post by screamer69 »

fscott wrote:Yes, the AFR gauge and MS can share the same sensor.
thanx !!
v3 board running extra 29k
megatune 225
2.0 8v vauxhall turbo 205bhp-232ftlbs@13psi (part mapped due to f***ed fuel pump) shes going to 28psi soon

My Success story http://www.msefi.com/viewtopic.php?p=12 ... def#129576
Top
Post Reply

Return to “Tuning Fuel and Air”