Help, my AFR generated table makes no sense!!

audibeanss · Post by **audibeanss** » Mon Aug 07, 2006 6:35 pm

Hi, Im new to MSnE. I just bought an LC-1, and I'm trying to genertate an AFR table using the "generate table" function under the tools heading for the AFR targets.

I put in the correct values for my engine data, and it give me jibberish. The AFR values are all over the map....lean on one RPM bin, and rich the next one up.

Anyone else see this?
thanx,

Bernard Fife · Post by **Bernard Fife** » Mon Aug 07, 2006 6:45 pm

audibeanss,

The VE table generator is for VE tables only. That's why it is under 'VE specific'. It is not for use with AFR or spark advance tables.

Lance.

audibeanss · Post by **audibeanss** » Mon Aug 07, 2006 6:47 pm

Ahh, thanx. I'm on my own I guess

LT401Vette · Post by **LT401Vette** » Mon Aug 07, 2006 7:16 pm

Generally the default AFR tables are a good starting point. They don't vary as much as VE or spark tables.