squirting a v-max-ignition to be sorted out first
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
blvdblaster1200
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri Sep 26, 2008 7:34 pm
squirting a v-max-ignition to be sorted out first
ive been poking around in old posts and notice the v-max is kinda tricky getting the ignition worked out.contacted niels and he says he used a zener diode bridge and uses two pulses to set his up.also i have heard mention of a sequencer.would this be a candidate to use on the max?what do i need to do to set up an engine with a odd firing out of phase ignition?also need dimensions on the controller too. thanks loads mike