I am just working on the schematics for a board to plug the microsquirt module into, but can't find an Eagle cad library for AMPSEAL connectors. I checked the Eagle cad list of libraries, and have been googling it, but can't seem to locate one. Before I build my own, does anyone have or know where I can find a library for the Ampseal connectors?
Thanks,
Leo
Eagle Cad library for Tyco/AMPSEAL connector
Re: Eagle Cad library for Tyco/AMPSEAL connector
If anyone is interested, here is a link to a .lbr that I found.
https://sites.google.com/site/ecuteam/H ... edirects=0
I want to thank Jon Stoker, Brian Patterson, and Avishesh Dhakal for their work on the library.
L.
https://sites.google.com/site/ecuteam/H ... edirects=0
I want to thank Jon Stoker, Brian Patterson, and Avishesh Dhakal for their work on the library.
L.
Re: Eagle Cad library for Tyco/AMPSEAL connector
I have a component built for the express PCB program, and its been verified, if anyone is interested.
-
Peter Florance
- Helpful Squirter
- Posts: 92
- Joined: Fri Apr 02, 2004 7:40 pm
- Location: Virginia Beach, VA
- Contact:
Re: Eagle Cad library for Tyco/AMPSEAL connector
Yes please!h22 wrote:I have a component built for the express PCB program, and its been verified, if anyone is interested.
Peter Florance - PF Tuning http://www.pftuning.com
81 BMW Euro 528i ESP Car MS3 or MS2Sequencer V1.04 (depending on the day)
60-2 Wheel LS2 Coils, Low Z Inj
81 BMW Euro 528i ESP Car MS3 or MS2Sequencer V1.04 (depending on the day)
60-2 Wheel LS2 Coils, Low Z Inj
Re: Eagle Cad library for Tyco/AMPSEAL connector
+1 Yes please!h22 wrote:I have a component built for the express PCB program, and its been verified, if anyone is interested.